Complex Vertical Impact Crusher Position: Home > Crushers > Crushing Equipment
Complex Vertical Impact Crusher

Usage and Application
The complex vertical impact Crusher is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210 MPa and humidity less than 5%. E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite, sandstone and so on.

salescrushers@gmail.com

Working Principle

The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.

Features

1. Compact structure, easy maintenance;
2. High crushing ratio, even output granularity;
3. High reliability, low investment;
4. Low noise, less dust.

Main Specifications

PFL-B Series Main Specifications


Model
Inside Diameter of Cylinder
(mm)
Feeding Size
(mm)
Output Size
(mm)
Capacity
(t/h)
Motor
Power
(kw)
Weight
(t)
Overall Dimension
(mm)
PFL-750B 750 <100 <5,90% 8-20 45 4 2370×1100×1300
PFL-1000B 1000 <120 <5,90% 15-30 55 5.5 2680×1500×1400
PFL-1250B 1250 <150 <5,90% 30-45 90 8.2 2970×1900×1900
PFL-1500B 1500 <180 <5,90% 50-70 132 13.7 3400×2200×2100
PFL-1750B 1750 <200 <5,90% 70-100 160 17.5 3800×2360×2200
PFL-2000B 2000 <220 <5,90% 100-120 185 23 4590×2680×2300

PFL Series Main Specifications


Model
Inside Diameter of Cylinder
(mm)
Main Shaft Speed
(r/min)
Feeding Size
(mm)
Output
Size
(mm)
Capacity
(t/h)
Motor
Power
(kw)
Weight
(t)
Overall Dimension
(mm)
PFL-800 800 1100 <50 <5,90% 5-15 22 2.1 2000×900×1650
PFL-1000 1000 980 <80 <5,90% 10-25 45 3.2 2700×1150×1800
PFL-1250 1250 780 <120 <5,90% 20-40 75 4.2 2900×1350×1850

Note:Any change of technical data will not inform additionally.

Inquiry Us